YMOO Bluetooth 5.2 Car Adapter brings you a “fast, efficient, lossless, high-quality” music experience Bluetooth 5.2 chip
- Bluetooth 5.2 chip
YMOO M101S is built with the latest Bluetooth 5.2 chip, which has faster transmission speed, lower latency and lower power consumption than the previous generation of Bluetooth 5.0. Use the YMOO Bluetooth 5.2 Car Adapter to liberate your old music devices and bring you the ultimate music experience.
- Built-in 22nm process dual noise reduction microphone
The YMOO M101S has a built-in 22nm Process Dual-Mic Noise Reduction, and Integrates A Fully Differential Analog Microphone Input Amplifier & A Low-Noise Microphone Bias Generator.Provide You With Clear Call Sound And Hi-Fi Music Enjoyment.
- Wake Up Siri/Google Assistant
You only need to tap the MFB three times to wake up the Siri/Google Assistant in your phone, Control your phone with verbal commands, allowing you to drive safely.
- long standby
YMOO M101S uses a large-capacity battery design, allowing you to enjoy up to 13 hours of music experience, and it only takes 1.5 hours to charge. In addition, it is worth mentioning that the high-quality battery used in the YMOO M101S allows you to use it while charging, and will not bring you safety hazards.
- Humanized configuration
YMOO M101S is equipped with AUX connector and 3.5mm cable, which can be used in different scenarios.

Technical Specifications
Bluetooth version | V5.2 |
Type | Receiver |
Chip | BK3296 |
Codec support | SBC/AAC |
Battery life | 13 Hour |
Supporting | car/Headphones/Home Stereo/Speakers |
Working distance | 40Ft |
Number of connections | 2 |
Interface | 3.5mm |
Microphone | 22nm Noise Cancelling Microphone |
Operating temperature | -10℃ ~ 60℃ |
Charging voltage | 5V |
In the box | ML101S *1 ;Type-C power cable *1;3.5 male-3.5 male metal latch *1;3.5 male-3.5 male audio cable*1; |
Why choose YMOO ML101S Car Bluetooth Adapter?
|
|
|
---|---|---|
Bluetooth 5.2 Mini Bluetooth Car Adapter
|
Dual Connection
|
In the box
|
|
|
|
---|---|---|
One key to wake up siri
|
Use while charging
|
40Ft long distance transmission
|
Enjoy wireless music playback anytime!
This is how to play ML101S
Other questions you want to know:
Q1: Why can’t I use it while charging?
ML101S adopts PA battery protection system, if you need to use it while charging, please do as follows: 1. First put ML101S; 2. Connect your mobile phone; 3. Plug in the power supply to charge; 4. It can be used while charging.
Q2: How to reset ML101S device?
Press and hold the ML101S +/- at the same time until the LED flashes purple 3 times (about 10s), then the device will restart and clear the pairing record, and the factory reset is successful.
Q3: How to pair the second device?
1. Set the ML101S to pairing mode again;
2. Turn on the Bluetooth of the second mobile phone, find the ML101S, and click connect;
3. After the second device is successfully paired and connected, the first device will be disconnected, and the first device needs to be connected to the ML101S again, so that the two devices can be connected to the ML101S at the same time.
(Note that music can only be played on one device. If you need to play music on another device, you need to pause the music on the first device.)
Q4: Does it support Aptx and AAC decoding?
ML101S supports AAC decoding (a common Bluetooth audio encoding format for Apple mobile phones), but does not support Aptx.
Reviews
There are no reviews yet.